BIS for Animal Feed Ingredients in India: QCO 2026 Guide
Mineral mixtures, dicalcium phosphate, and cattle licks sit quietly inside India’s dairy and livestock supply chain. The Animal Feeds and Feed Ingredients (Quality Control) Order, 2026 now makes BIS certification mandatory for these three products. The order was notified on 7 October 2026 and published in the Gazette on 12 October 2026. Most manufacturers must comply by 1 April 2027. This guide explains who is affected and how to prepare. For licensing support, see our BIS certification services in India.
Key takeaways
- Three products are covered: mineral mixtures for cattle feed, feed-grade dicalcium phosphate, and common salt and cattle licks.
- The standards are IS 1664, IS 5470, and IS 920 respectively.
- The order took effect on 12 October 2026, with compliance for most manufacturers from 1 April 2027.
- Small and micro enterprises have later dates under the order.
- Violations are punishable under the BIS Act, 2016.
Contents
- What the order covers
- Standards by product
- Deadlines
- Who must comply
- How to get certified
- Common mistakes
- Consequences of non-compliance
- FAQs
1. What the order covers
The order brings three feed products under mandatory conformity: mineral mixtures used to supplement cattle feed, animal feed grade dicalcium phosphate (DCP), and common salt and cattle licks for animals. Mineral mixtures and DCP supply minerals such as calcium and phosphorus in many cattle rations. A 2024 draft had also listed two oilseed cakes, but they are not in the final order.
2. Standards by product
| Product | Indian Standard |
|---|---|
| Mineral mixtures for supplementing cattle feeds | IS 1664 |
| Dicalcium phosphate, animal feed grade | IS 5470 |
| Common salt and cattle licks for animal consumption | IS 920 |
The order applies the latest version of each standard, including amendments.
3. Deadlines
| Enterprise type | Compliance date |
|---|---|
| Most manufacturers (general) | 1 April 2027 |
| Small and micro enterprises | Later dates as set in the order |
Because the first date is about five months away, testing and factory preparation should start now.
4. Who must comply
- Manufacturers of the three products need a BIS licence for each.
- Compound feed makers and dairy-linked buyers will need certified inputs once their suppliers’ deadlines pass.
- Traders and distributors should start asking suppliers for licence details and test status.
5. How to get certified
- Map each product to its standard: IS 1664, IS 5470, or IS 920.
- Check your process: raw material sourcing, batching, and in-house testing capability.
- Test samples at a BIS-recognised laboratory.
- Apply for the licence and complete the factory inspection.
- Mark packaging with the Standard Mark and licence number after approval.
6. Common mistakes
- Assuming the draft’s oilseed cakes are covered when the final order excludes them.
- Waiting for April 2027 before booking tests or audits.
- Not checking whether a mineral mixture falls under IS 1664 types before applying.
- Ignoring supplier licences, which can disrupt your own production later.
- Printing the mark on bags before the licence is granted.
7. Consequences of non-compliance
Violations of the order are punishable under the BIS Act, 2016. For feed businesses, the practical risks also include supply interruptions and buyer rejections once certified inputs become the norm.
FAQs
Is BIS certification mandatory for animal feed ingredients in India?
Yes, for mineral mixtures for cattle feed, feed-grade dicalcium phosphate, and common salt and cattle licks under the Animal Feeds and Feed Ingredients (Quality Control) Order, 2026.
Which standards apply?
IS 1664 for mineral mixtures, IS 5470 for dicalcium phosphate, and IS 920 for salt and cattle licks.
When must manufacturers comply?
Most manufacturers must comply from 1 April 2027. Small and micro enterprises follow later dates in the order.
Are oilseed cakes covered?
No. They were in the 2024 draft but are not in the final order.
Conclusion
If you make mineral mixtures, feed-grade DCP, or cattle licks, plan your BIS licence now. Start with product-to-standard mapping, then lock in testing and the factory audit well before April 2027. For support, see our BIS certification services in India.
Related guides: BIS for HDPE and PP Woven Sacks | BIS for Stainless Steel Utensils | BIS for Aluminium Products
Mineral mixtures, dicalcium phosphate, and cattle licks sit quietly inside India’s dairy and livestock supply chain. The Animal Feeds and Feed Ingredients (Quality Control) Order, 2026 now makes BIS certification mandatory for these three products. The order was notified on 7 October 2026 and published in the Gazette on 12 October 2026. Most manufacturers must comply by 1 April 2027. This guide explains who is affected and how to prepare. For licensing support, see our BIS certification services in India.
Key takeaways
- Three products are covered: mineral mixtures for cattle feed, feed-grade dicalcium phosphate, and common salt and cattle licks.
- The standards are IS 1664, IS 5470, and IS 920 respectively.
- The order took effect on 12 October 2026, with compliance for most manufacturers from 1 April 2027.
- Small and micro enterprises have later dates under the order.
- Violations are punishable under the BIS Act, 2016.
Contents
- What the order covers
- Standards by product
- Deadlines
- Who must comply
- How to get certified
- Common mistakes
- Consequences of non-compliance
- FAQs
1. What the order covers
The order brings three feed products under mandatory conformity: mineral mixtures used to supplement cattle feed, animal feed grade dicalcium phosphate (DCP), and common salt and cattle licks for animals. Mineral mixtures and DCP supply minerals such as calcium and phosphorus in many cattle rations. A 2024 draft had also listed two oilseed cakes, but they are not in the final order.
2. Standards by product
| Product | Indian Standard |
|---|---|
| Mineral mixtures for supplementing cattle feeds | IS 1664 |
| Dicalcium phosphate, animal feed grade | IS 5470 |
| Common salt and cattle licks for animal consumption | IS 920 |
The order applies the latest version of each standard, including amendments.
3. Deadlines
| Enterprise type | Compliance date |
|---|---|
| Most manufacturers (general) | 1 April 2027 |
| Small and micro enterprises | Later dates as set in the order |
Because the first date is about five months away, testing and factory preparation should start now.
4. Who must comply
- Manufacturers of the three products need a BIS licence for each.
- Compound feed makers and dairy-linked buyers will need certified inputs once their suppliers’ deadlines pass.
- Traders and distributors should start asking suppliers for licence details and test status.
5. How to get certified
- Map each product to its standard: IS 1664, IS 5470, or IS 920.
- Check your process: raw material sourcing, batching, and in-house testing capability.
- Test samples at a BIS-recognised laboratory.
- Apply for the licence and complete the factory inspection.
- Mark packaging with the Standard Mark and licence number after approval.
6. Common mistakes
- Assuming the draft’s oilseed cakes are covered when the final order excludes them.
- Waiting for April 2027 before booking tests or audits.
- Not checking whether a mineral mixture falls under IS 1664 types before applying.
- Ignoring supplier licences, which can disrupt your own production later.
- Printing the mark on bags before the licence is granted.
7. Consequences of non-compliance
Violations of the order are punishable under the BIS Act, 2016. For feed businesses, the practical risks also include supply interruptions and buyer rejections once certified inputs become the norm.
FAQs
Is BIS certification mandatory for animal feed ingredients in India?
Yes, for mineral mixtures for cattle feed, feed-grade dicalcium phosphate, and common salt and cattle licks under the Animal Feeds and Feed Ingredients (Quality Control) Order, 2026.
Which standards apply?
IS 1664 for mineral mixtures, IS 5470 for dicalcium phosphate, and IS 920 for salt and cattle licks.
When must manufacturers comply?
Most manufacturers must comply from 1 April 2027. Small and micro enterprises follow later dates in the order.
Are oilseed cakes covered?
No. They were in the 2024 draft but are not in the final order.
Conclusion
If you make mineral mixtures, feed-grade DCP, or cattle licks, plan your BIS licence now. Start with product-to-standard mapping, then lock in testing and the factory audit well before April 2027. For support, see our BIS certification services in India.
Related guides: BIS for HDPE and PP Woven Sacks | BIS for Stainless Steel Utensils | BIS for Aluminium Products
Leave a Reply